The latest LED technology makes this fixture the next generation of security lighting.
TECHNICAL SPECIFICATIONS
Passive infra-red motion sensor/detector (adjustable tilt/swivel for acurate aiming).
Up to approximately 180 degree / 40' (12 metre) detection range.
On/off mode switch on base of fixture.
80 LED's within the lamp head unit.
Approx. 480 Lumens.
Equivalent to about 50-60w of regular lighting.
Lamp head unit has adjustable tilt (up/down) and angle (left/right).
Integral high capacity 6 volt 2 A/hr sealed lead acid rechargeable battery (replaceable).
High quality 3 watt amorphous solar panel (with a mounting plate and adjustable tilt position).
Detachable solar panel can be separated up to 12' (4 metres) away with cable cord supplied.
The lamp will iiluminate and stay on when activity is detected and the timer then starts after activity ceases.
Adjustable 'light-on' duration/timer setting (1 to 60 seconds after last activity detection).
Adjustable sensitivity setting dial.
Adjustable lux setting dial.
All plastic construction, no parts to rust.
Black color.
Color of light output is white.
Easy to install almost anywhere.
Solar panel best fixed facing South (otherwise East or West).
Provides illumination of an area approx. 40' x 30' (1200' square) and possibly beyond.
This motion sensor security light is naturally, not designed to be used for continuous illumination. Its purpose is to illuminate for short periods upon activation of the motion sensor.
Solar panel is approximately 8" x 6" (L x W) with the attached mounting plate having a footprint of approx. 4" x 4" (L x W).
Floodlight main body is approximately 5.5" x 5" x 3" (L x W x D) although just two screws or bolts are required to secure this fixture to almost any vertical surface.
The floodlight head (lampshade/lens section) is approximately 7" x 3.5" x 1.5" ( L x W x D).
Time length of night time illumination is estimated and subject to various factors including geographic location, seasons, weather conditions & location of product etc.
