Creating and Easy and Affordable Lighted Walkway!
This is an easy way to lay solar stepping stones to provide an affordable and beautiful lighted pathway that will not cost you a fortune, with no electric bill.
There is no need to build a foundation of sandstone or dirt when you lay down solar stepping stones. If your stones have some height or shape , you just remove the grass and soil to the appropriate depth and width. This project should not take that long to achieve.
Depending on the size an afternoon is all you need.
What is needed for this project:
Solar Stepping stones
Flat spade shovel or hoe
A plan of how you would like the path to go.
Measurement of the walkway and how many solar stones you will use
Divide the number of Solar stepping stone into the complete measurement of the walk way. This will give you the distance that they should place them . We recommend 20 inches apart.
Directions:
1. Start by laying out your path way. Position all your solar stepping stones where they should go , then outline them with your shovel or hoe, next figure out how much grass, mulch or dirt you will need to remove to make the stone flush will the rest of the walk way once inserted.
2. Next Remove the grass, mulch or dirt on your path, next take the solar stepping stone and set it aside, then carefully remove the grass or soil with level strokes.
3. Last step is to install the solar stepping stones. Just lay the stones into the spaces that you’ve created . Make sure the solar stepping stones are below the mowing grass , rock or bark mulch level.
Now you are done, let the solar stepping stones charge for about 4 days to get the battery to the maximum charge for maximum light output. If you are using rocks or mulch in between then take a rake and bring the fill you are using right up to the stepping stone. That’s it You have just created and easy , affordable lighted solar walkway.
M. Spinelli
